Tesla Model S Plaid Facelift II Pre-Preg Carbon Fibre Side Skirts by Adro (2021+)
The Model S has always lived or died on its profile — long, low, and uninterrupted. Adro's Carbon Fiber Side Skirts are designed to lean into that silhouette rather than fight it. Running the full length of the rocker panels, they extend the lower bodyline, drop the visual ride height, and pull the car closer to the road without ever crossing into territory that feels aftermarket or out of place.
The skirts are produced in genuine pre-preg carbon fiber with a 2x2 twill weave that's matched left-to-right and front-to-back. Because the resin is pre-impregnated and the panels are cured under heat and pressure in an autoclave, the finished part is lighter and stiffer than wet-laid carbon, with a deeper, more uniform gloss. The weave on the driver's side mirrors the passenger side exactly — a small detail that shows up immediately when the car is parked under direct light.
Fitment was developed from a full 3D scan of the Model S body, so the skirts hug the contour of the rocker panel from the leading edge of the front wheel to the trailing edge of the rear. There's no flex, no gapping, and no creative installation required. Functionally, the extended profile keeps high-pressure air from spilling under the car along the sides, which sharpens stability through long, fast sweepers.
Key features
- Pre-preg carbon construction — autoclave-cured for the strength-to-weight, weave consistency, and finish quality you'd expect on a factory carbon trim option.
- 3D-scanned OEM fitment — designed around the actual Model S body, so they line up clean with no trimming or shimming.
- CFD-developed profile — extended rocker geometry that helps manage side-body airflow and improves planted feel at speed.
- Matched weave, full length — left and right panels mirror each other with consistent twill alignment from end to end.
What's in the box
- 1 x Pair of Adro Carbon Fibre (pre-preg, 2x2 weave) Side Skirts (LH + RH)
- 3M Adhesive Tape
- Mounting Hardware
Compatible models
- Tesla Model S (2021–2025)
Original: $2,748.10
-65%$2,748.10
$961.83Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
The Model S has always lived or died on its profile — long, low, and uninterrupted. Adro's Carbon Fiber Side Skirts are designed to lean into that silhouette rather than fight it. Running the full length of the rocker panels, they extend the lower bodyline, drop the visual ride height, and pull the car closer to the road without ever crossing into territory that feels aftermarket or out of place.
The skirts are produced in genuine pre-preg carbon fiber with a 2x2 twill weave that's matched left-to-right and front-to-back. Because the resin is pre-impregnated and the panels are cured under heat and pressure in an autoclave, the finished part is lighter and stiffer than wet-laid carbon, with a deeper, more uniform gloss. The weave on the driver's side mirrors the passenger side exactly — a small detail that shows up immediately when the car is parked under direct light.
Fitment was developed from a full 3D scan of the Model S body, so the skirts hug the contour of the rocker panel from the leading edge of the front wheel to the trailing edge of the rear. There's no flex, no gapping, and no creative installation required. Functionally, the extended profile keeps high-pressure air from spilling under the car along the sides, which sharpens stability through long, fast sweepers.
Key features
- Pre-preg carbon construction — autoclave-cured for the strength-to-weight, weave consistency, and finish quality you'd expect on a factory carbon trim option.
- 3D-scanned OEM fitment — designed around the actual Model S body, so they line up clean with no trimming or shimming.
- CFD-developed profile — extended rocker geometry that helps manage side-body airflow and improves planted feel at speed.
- Matched weave, full length — left and right panels mirror each other with consistent twill alignment from end to end.
What's in the box
- 1 x Pair of Adro Carbon Fibre (pre-preg, 2x2 weave) Side Skirts (LH + RH)
- 3M Adhesive Tape
- Mounting Hardware
Compatible models
- Tesla Model S (2021–2025)
