







BMW Carbon Fibre Shark Fin Aerial Cover by FORM
Perfect for tying in with existing carbon fibre accessories, the FORM Shark Fin Aerial cover is an easy and subtle modification that adds a little something extra.
Manufactured entirely from quality pre-preg carbon fibre, the shark fin simply slides over the OEM Aerial. Made using a 2x2 weave, it matches OEM and most aftermarket carbon perfect and as the cover is built from just 1 layer of pre-preg carbon fibre, radio interference is non-existent.Â
| Technical Specification | |
| Product Dimensions | 23cm x 8cm x 7cm |
| Product Weight | 0.1kg |
| Materials | Carbon fibre |
| Manufacturer | FORM |
| Warranty | 1 Year |
Note: Due to the properties of carbon fibre, it's possible that the shark fin covers can cause interference with GPS signals when installed.Â
What's in the box
- 1 x Full Carbon Fibre Shark Fin Cover
- 3M Double Sided Tape (pre-applied)
- 1 x Adhesive Promoter
How to install
Carbon Fibre Shark Fin Aerial Cover
You’ll Need
-
Mild soap & water
-
Microfiber cloth
-
Isopropyl alcohol or panel wipe
-
(Optional) Hair dryer for warming the tape
---------------------
1. Clean the antenna
-
Wash the shark fin antenna with soap and water.
-
Dry it completely.
2. Degrease the surface
-
Wipe the antenna with alcohol or a panel wipe to remove wax/oil.
-
Let it dry.
3. Test fit
-
Place the carbon fibre cover over the antenna without removing the tape.
-
Make sure it lines up properly.
4. Stick it on
-
Peel off the 3M tape liner.
-
Carefully place the cover on the antenna.
-
Press down firmly around all edges for 30–60 seconds.
-
(Optional) Warm the tape slightly with a hair dryer for a stronger bond.
5. Let it cure
-
Don’t touch or wash the car for 24–48 hours.
Compatible models
If your model is out of stock, please match your version below (Version A or B) and choose from any of the remaining vehicles left.
For confirmation on this you can contact us and we'll be happy to advise.
Version AÂ (TX-01)
- 2 Series, M2 & M2 Competition (2014-2021, F22 F87)
- 2 Series & M240i Coupe (2021-2022, G42)
- 2 Series Gran Coupe (2020+, F44)
- 3 Series & M3 (2012-2019, F30 F80)
- 3 Series & M3 (2019-2024, G20 G80)
- 4 Series & M4 (2014-2020, F32 F82)
- 4 Series & M4 (2021-2024, G22 G23 G26 G82)
- 5 Series & M5 (2017-2023, G30 F90)
- 7 Series Saloon (2016+, G12)
- 8 Series & M8 (2018+, G14 G14 G16 F91 F92 F93)
Version BÂ (TX-02)
- BMW 1 Series (2011-2019, F20 F21)
- BMW 1 Series (2019-2024, F40)
- BMW 3 Series Estate (2012-2019, F31)
- BMW 3 Series Estate (2019+ G21)
- BMW 5 Series Estate (2017+, G31)
- BMW X3 & X3M (2018+, G01 F97)
- BMW X4 (2014-2018, F26)
- BMW X4 & X4M (2018+, G02 F98)
- BMW X5 & X5M (2013-2018, F15 F85)
- BMW X5 & X5M (2019+, G05 F95)
- BMW X6 & X6M (2013-2019, F16 F86)
- BMW X6 & X6M (2020+, G06 F96)
- BMW X7 (2018+, G07)
Â
Original: $65.72
-65%$65.72
$23.00Product Information
Product Information
Shipping & Returns
Shipping & Returns
Description
Perfect for tying in with existing carbon fibre accessories, the FORM Shark Fin Aerial cover is an easy and subtle modification that adds a little something extra.
Manufactured entirely from quality pre-preg carbon fibre, the shark fin simply slides over the OEM Aerial. Made using a 2x2 weave, it matches OEM and most aftermarket carbon perfect and as the cover is built from just 1 layer of pre-preg carbon fibre, radio interference is non-existent.Â
| Technical Specification | |
| Product Dimensions | 23cm x 8cm x 7cm |
| Product Weight | 0.1kg |
| Materials | Carbon fibre |
| Manufacturer | FORM |
| Warranty | 1 Year |
Note: Due to the properties of carbon fibre, it's possible that the shark fin covers can cause interference with GPS signals when installed.Â
What's in the box
- 1 x Full Carbon Fibre Shark Fin Cover
- 3M Double Sided Tape (pre-applied)
- 1 x Adhesive Promoter
How to install
Carbon Fibre Shark Fin Aerial Cover
You’ll Need
-
Mild soap & water
-
Microfiber cloth
-
Isopropyl alcohol or panel wipe
-
(Optional) Hair dryer for warming the tape
---------------------
1. Clean the antenna
-
Wash the shark fin antenna with soap and water.
-
Dry it completely.
2. Degrease the surface
-
Wipe the antenna with alcohol or a panel wipe to remove wax/oil.
-
Let it dry.
3. Test fit
-
Place the carbon fibre cover over the antenna without removing the tape.
-
Make sure it lines up properly.
4. Stick it on
-
Peel off the 3M tape liner.
-
Carefully place the cover on the antenna.
-
Press down firmly around all edges for 30–60 seconds.
-
(Optional) Warm the tape slightly with a hair dryer for a stronger bond.
5. Let it cure
-
Don’t touch or wash the car for 24–48 hours.
Compatible models
If your model is out of stock, please match your version below (Version A or B) and choose from any of the remaining vehicles left.
For confirmation on this you can contact us and we'll be happy to advise.
Version AÂ (TX-01)
- 2 Series, M2 & M2 Competition (2014-2021, F22 F87)
- 2 Series & M240i Coupe (2021-2022, G42)
- 2 Series Gran Coupe (2020+, F44)
- 3 Series & M3 (2012-2019, F30 F80)
- 3 Series & M3 (2019-2024, G20 G80)
- 4 Series & M4 (2014-2020, F32 F82)
- 4 Series & M4 (2021-2024, G22 G23 G26 G82)
- 5 Series & M5 (2017-2023, G30 F90)
- 7 Series Saloon (2016+, G12)
- 8 Series & M8 (2018+, G14 G14 G16 F91 F92 F93)
Version BÂ (TX-02)
- BMW 1 Series (2011-2019, F20 F21)
- BMW 1 Series (2019-2024, F40)
- BMW 3 Series Estate (2012-2019, F31)
- BMW 3 Series Estate (2019+ G21)
- BMW 5 Series Estate (2017+, G31)
- BMW X3 & X3M (2018+, G01 F97)
- BMW X4 (2014-2018, F26)
- BMW X4 & X4M (2018+, G02 F98)
- BMW X5 & X5M (2013-2018, F15 F85)
- BMW X5 & X5M (2019+, G05 F95)
- BMW X6 & X6M (2013-2019, F16 F86)
- BMW X6 & X6M (2020+, G06 F96)
- BMW X7 (2018+, G07)
Â























