šŸŽ‰ Up to 70% Off Selected ItemsShop Sale
Product image 1
Product image 2
Product image 3
Product image 4
Product image 5
Product image 6
Product image 7
Product image 8
Product image 9
Product image 10
Product image 11
Product image 12
Product image 13
Product image 14
Product image 15
HomeStore

Audi R8 4S Facelift Pre-Preg Carbon Fibre Front Splitter by FORM

Audi R8 4S Facelift Pre-Preg Carbon Fibre Front Splitter by FORM

Enhance the aesthetics and aerodynamics of your Audi R8 4S Facelift with this meticulously crafted FORM Industries Carbon Fibre Front Splitter.

Why Choose the FORM Industries Carbon Front Splitter for AUDI R8 4S Facelift?

  • Address the Gap: Eliminate the unsightly gap left by the stock Audi R8 4S Facelift bumper for a lower, sleeker profile.
  • Sophisticated Aggression: Enhance the aesthetics of your R8 with a touch of motorsport-inspired design.
  • Lightweight Strength: Crafted from high-quality, 2x2 weave pre-preg carbon fiber for exceptional strength without added weight.
  • Potential Performance Gains: The design may improve downforce at higher speeds, enhancing handling and stability.
  • Flawless Fitment: FORM Industries's renowned precision guarantees a seamless integration with your Audi R8 4S Facelift.

What's in the box

  • 1 x FORM Industries Carbon Fibre (pre-preg, 2x2 Weave) Front Splitter

How to install

1. Preparation

  • Park the car on a flat surface and lift the front end slightly with ramps or a jack/stands (for clearance).

  • Gather tools: trim removal tools, socket set, screwdriver, drill with self-tapping screw bit, and masking tape (optional to protect paint).

2. Remove the OEM Gloss Black Lip

  • Locate the OEM fasteners underneath the front lip.

  • Carefully unscrew or unclip them.

  • Gently pull the OEM gloss black lip away from the bumper ā€” use trim tools to avoid scratching paint.

3. Test Fit the FORM Front Splitter

  • Position the FORM splitter in place of the OEM lip.

  • Ensure it aligns with the bumper edges and sits flush.

  • Make adjustments until the fitment is perfect. Use masking tape temporarily to hold it in position if needed.

4. Secure with Self-Tapping Screws

  • Starting from the center, drill in self-tapping screws through the splitter into the bumper underside.

  • Work outward toward the edges, securing screws evenly to maintain alignment.

  • Double-check spacing so the splitter is mounted symmetrically.

5. Final Checks

  • Confirm all screws are tight but not over-torqued (to avoid stripping).

  • Inspect splitter alignment from the front and sides.

  • Lower the vehicle and check clearance with the ground.

WATCH OUR VIDEO ON THE FORM Industries AUDI R8 BODYKIT HERE:

YouTube Video Thumbnail

$515.89

Original: $1,473.97

-65%
Audi R8 4S Facelift Pre-Preg Carbon Fibre Front Splitter by FORMā€”

$1,473.97

$515.89

Product Information

Shipping & Returns

Description

Enhance the aesthetics and aerodynamics of your Audi R8 4S Facelift with this meticulously crafted FORM Industries Carbon Fibre Front Splitter.

Why Choose the FORM Industries Carbon Front Splitter for AUDI R8 4S Facelift?

  • Address the Gap: Eliminate the unsightly gap left by the stock Audi R8 4S Facelift bumper for a lower, sleeker profile.
  • Sophisticated Aggression: Enhance the aesthetics of your R8 with a touch of motorsport-inspired design.
  • Lightweight Strength: Crafted from high-quality, 2x2 weave pre-preg carbon fiber for exceptional strength without added weight.
  • Potential Performance Gains: The design may improve downforce at higher speeds, enhancing handling and stability.
  • Flawless Fitment: FORM Industries's renowned precision guarantees a seamless integration with your Audi R8 4S Facelift.

What's in the box

  • 1 x FORM Industries Carbon Fibre (pre-preg, 2x2 Weave) Front Splitter

How to install

1. Preparation

  • Park the car on a flat surface and lift the front end slightly with ramps or a jack/stands (for clearance).

  • Gather tools: trim removal tools, socket set, screwdriver, drill with self-tapping screw bit, and masking tape (optional to protect paint).

2. Remove the OEM Gloss Black Lip

  • Locate the OEM fasteners underneath the front lip.

  • Carefully unscrew or unclip them.

  • Gently pull the OEM gloss black lip away from the bumper ā€” use trim tools to avoid scratching paint.

3. Test Fit the FORM Front Splitter

  • Position the FORM splitter in place of the OEM lip.

  • Ensure it aligns with the bumper edges and sits flush.

  • Make adjustments until the fitment is perfect. Use masking tape temporarily to hold it in position if needed.

4. Secure with Self-Tapping Screws

  • Starting from the center, drill in self-tapping screws through the splitter into the bumper underside.

  • Work outward toward the edges, securing screws evenly to maintain alignment.

  • Double-check spacing so the splitter is mounted symmetrically.

5. Final Checks

  • Confirm all screws are tight but not over-torqued (to avoid stripping).

  • Inspect splitter alignment from the front and sides.

  • Lower the vehicle and check clearance with the ground.

WATCH OUR VIDEO ON THE FORM Industries AUDI R8 BODYKIT HERE:

YouTube Video Thumbnail

Audi R8 4S Facelift Pre-Preg Carbon Fibre Front Splitter by FORM | AUTOID